Jim's Test & Tag

/Jim's Test & Tag

About Jim's Test & Tag

At Jim's Test and Tag, we keep our values and we equip our clients and franchises with the best articles to take care of all their test and tag needs.

How to detect a microwave radiation leak

By | May 17th, 2021|Categories: Appliance Testing|

Have you ever been worried about using a microwave oven, or wondered how to detect a microwave radiation leak? Microwave ovens are extremely useful for [...]

The importance of testing and tagging electrical appliances at the workplace

By | April 14th, 2021|Categories: Appliance Testing, Electrical testing|

Wherever there are appliances, there is a risk, which is why testing and tagging electrical appliances at the workplace is critical. As an employer, it’s [...]

Why do you need portable appliance testing?

By | March 16th, 2021|Categories: Appliance Testing|

As you'll know already, when you’re in business you're legally required to ensure all equipment at your place of work is electrically safe and maintained [...]

Reasons why your RCD keeps tripping

By | March 9th, 2021|Categories: RCD Testing|

There can be several reasons why your RCD keeps tripping. By nature, an RCD is a safety switch. It works by continually monitoring the electrical current. If it detects a fault in the circuit, it responds by shutting down the flow of electricity. This helps protect anyone who may come in contact with that fault.

What goes into electrical testing and tagging in the workplace?

By | February 25th, 2021|Categories: Appliance Testing, Electrical testing|

The Health and Safety at Work Act 2015 (HSWA) reminds every business that they have a responsibility to ensure the health and safety of workers, [...]

RCD protection (and how important it is)

By | February 12th, 2021|Categories: RCD Testing|

Every home and business should use RCDs, but what does that mean? In case you didn't know, RCD stands for residual current device. It's another [...]

A guide to what the Test and Tag colours mean

By | January 29th, 2021|Categories: Appliance Testing, Jim's Test & Tag NZ|

It’s worth knowing exactly what Test and Tag colours mean and what has been tested and how often the testing and tagging needs to be [...]

Appliance safety is a must for everyone

By | January 14th, 2021|Categories: Appliance Testing|

There’s more to appliance safety than you think Any appliance can be a health risk and there is more than one reason why. Appliance safety [...]

To keep the workplace safe, how often do I Test and Tag?

By | December 23rd, 2020|Categories: Jim's Test & Tag NZ|

Test and Tag intervals vary from industry to industry, workplace to workplace and depend on what equipment is being used and where. That’s already enough to confuse most people. The trouble is, there is a lot on the line. You need to know you have the very best when it comes to testing and tagging.

A safe workplace is vital, but how much does Testing and Tagging cost?

By | December 17th, 2020|Categories: Jim's Test & Tag NZ|

Many people ask, how much does testing and tagging cost? If you don’t have proper and professional testing and tagging, it could cost someone’s life. There are not many things that are more dangerous than electricity.