Jim’s Test & Tag NZ

/Jim's Test & Tag NZ

Why tagging and testing in NZ is more important than you think

By | August 18th, 2020|Categories: Appliance Testing, Earth loop impedance testing, Electrical testing, Jim's Test & Tag NZ, Portable appliance testing, RCD Testing|

Tagging and Testing is crucial to workplace safety. There’s no other word for it. It doesn’t matter whether it is called tagging and testing or [...]

Who can test and tag electrical equipment in NZ?

By | July 17th, 2020|Categories: Electrical testing, Jim's Test & Tag NZ|Tags: |

Testing and tagging electrical appliances and equipment is very important to any workplace. As in accordance with the Worksafe authority, it is a legal requirement [...]

Where to find the best in test and tag training

By | April 9th, 2020|Categories: Jim's Test & Tag NZ|

At Jim’s Test & Tag, we are always looking at ways to offer more. Our Test and Tag training is just another example of going [...]

Reasons to avoid cheap test and tag companies

By | February 23rd, 2020|Categories: Jim's Test & Tag NZ|

At Jim’s Test & Tag, we are serious about safety. Unfortunately, there are some ‘sellouts’ lurking in the tagging and testing industry, waiting to pounce [...]

Reasons why tool tagging is important on construction sites

By | February 17th, 2020|Categories: Jim's Test & Tag NZ|

We’ve already had one electrical shock at a workplace this year. When it comes to workplace safety, we can never afford to take it easy. [...]

What is the difference single phase and three phase?

By | February 7th, 2020|Categories: Jim's Test & Tag NZ|

So, you’ve heard the terms ‘single phase’ and ‘three phase’ been thrown around, but what do they actually mean? What is the difference between single [...]

PAT Testing in Schools

By | February 5th, 2020|Categories: Electrical testing, Jim's Test & Tag NZ|

Working at a school means you have a duty of care for your students and staff. Part of this duty of care includes maintaining a [...]

Products that have been recalled this Christmas

By | December 20th, 2019|Categories: Jim's Test & Tag NZ|

Christmas is just around the corner. If you’re like us and you always leave your shopping to the last minute, we have some safety tips [...]

How to perform an electrical safety test

By | October 18th, 2019|Categories: Jim's Test & Tag NZ|

If you want to pass your next routine inspection from WorkSafe, you need to make sure all of your electrical safety testing requirements have been [...]

How do electric shocks happen?

By | September 16th, 2019|Categories: Jim's Test & Tag NZ|

Workplace health and safety procedures have never been so advanced, so how do electric shocks happen on the job? There are a number of reasons [...]