RCD Testing

/RCD Testing

How To Identify Hazards In The Workplace

By | September 22nd, 2021|Categories: Appliance Testing, Electrical testing, RCD Testing|

Each and every workplace comes with its own risks and dangers, however small they may seem. The question is, do you know how to identify [...]

Reasons why your RCD keeps tripping

By | March 9th, 2021|Categories: RCD Testing|

There can be several reasons why your RCD keeps tripping. By nature, an RCD is a safety switch. It works by continually monitoring the electrical current. If it detects a fault in the circuit, it responds by shutting down the flow of electricity. This helps protect anyone who may come in contact with that fault.

RCD protection (and how important it is)

By | February 12th, 2021|Categories: RCD Testing|

Every home and business should use RCDs, but what does that mean? In case you didn't know, RCD stands for residual current device. It's another [...]

Why tagging and testing in NZ is more important than you think

By | August 18th, 2020|Categories: Appliance Testing, Earth loop impedance testing, Electrical testing, Jim's Test & Tag NZ, Portable appliance testing, RCD Testing|

Tagging and Testing is crucial to workplace safety. There’s no other word for it. It doesn’t matter whether it is called tagging and testing or [...]

Test and Tag Colour Guide

By | July 17th, 2019|Categories: Appliance Testing, Portable appliance testing, RCD Testing|

It’s that time of year when we like to give our refresher course on all the great work we do here at Jim’s Test & [...]

Commercial Kitchen Safety

By | July 1st, 2019|Categories: Appliance Testing, Fire Protection, RCD Testing|

Electrical tag and testing are important in every business - but how does it apply to yours?  This week, we are focussing on commercial kitchen [...]

RCD Compliance Updates

By | June 16th, 2019|Categories: RCD Testing|

At Jim’s Test & Tag, we are electrical safety experts.  To ensure your building is safe, we keep up to date with all the latest [...]

Electrical Safety Regulations NZ

By | April 16th, 2019|Categories: Appliance Testing, Earth loop impedance testing, Jim's Test & Tag NZ, Portable appliance testing, RCD Testing|

Do you own or operate a business? Make sure you know all about the electrical safety regulations you need to follow to make your workplace [...]

Electrical Safety Tips at School

By | February 10th, 2019|Categories: Jim's Test & Tag NZ, Portable appliance testing, RCD Testing|

Start the school year right with a focus on electrical safety.  At Jim’s Test & Tag, we offer electrical safety testing services to businesses all [...]

Electrical Safety and Hazard Prevention in the Workplace

By | February 18th, 2018|Categories: Appliance Testing, Earth loop impedance testing, Jim's Test & Tag NZ, Portable appliance testing, RCD Testing|

Electrical safety and hazard prevention are the key to longevity and success for every business in New Zealand. Imagine, after the all the hard work [...]